The Vizio remote is important for using your smart TV since you use it to navigate through the menu and various applications. However, some users are complaining that the Vizio TV remote sensor is not working.

Surefire fixes to get your remote working normally again

  • If your Vizio TV remote sensor is not working, it might be because of weak batteries.

  • You can fix this issue by power cycling your remote and TV.

  • Another effective solution to the problem is to remove any interfering electronic devices.

  • Download DriverFix (verified download file).

  • Click Start Scan to find all problematic drivers.

  • Click Update Drivers to get new versions and avoid system malfunctionings.

  • DriverFix has been downloaded by 0 readers this month.

This can be due to a series of factors, but it is not an issue that is impossible to fix. And we will show you how to get it working again in this guide.

Why isn’t my Vizio TV responding to the remote?

Below are some of the reasons your Vizio TV remote sensor might not be working:

  • Low batteries: The first thing to check if your Vizio TV is not responding to the remote is the remote battery. The solution to this is to change your batteries.
  • Presence of obstacles between the remote and TV: There needs to be a clear path between your remote and TV for the sensor to work. If obstacles block the path, the sensor might fail to work.
  • Interference from other electronic devices: Another potential cause of this issue is the presence of electronic devices emitting radiations that interfere with your remote. The fix to this is to remove these devices.

How to fix Vizio TV remote sensor not working?

1. Check if sensor is emitting IR

  • Turn on your mobile phone camera and point the remote to the camera (the end that you will normally point towards your TV).
  • Press and hold any button (especially the power and volume buttons) on the remote while still pointing toward your camera.
  • Check your camera screen to see if the LED light at the top of the remote is flashing light.
  • Finally, repeat this for all buttons on your remote.

Before making changes to your TV and remote, you should check if the remote is still emitting IR. If it does, you can proceed to the other fixes.

If the test fails, you might need to take the remote to a repair shop or replace it altogther.

2. Change batteries

This is one of the quickest solution to make sure the Vizio TV remote sensor is working. Just make sure you replace the batteries with fresh and compatible ones.

Most Vizio remotes will take either two AA batters or two AAA batteries. If the new batteries don’t solve the problem, move on to the next solution. 

3. Power cycle the remote and TV

  • Take the batteries out of the remote.
  • Press the power button and hold for a few seconds, then release.
  • Now, press every button on the remote at least once while the batteries are out. This helps to clear residual power from the remote.
  • Insert the battery into the remote.
  • Next, unplug the TV from the power outlet.
  • Press and hold down the TV’s power button for a few seconds. Wait for one minute after doing this.
  • Finally, plug the TV back into the power source and power it on.

After doing this, check if the Vizio TV remote sensor is now working.

4. Clear the way to the TV sensor

The IR sensor of the TV is usually located either on the bottom left or bottom right of the TV. The sensor is very sensitive to anything that might block it, even protective plastic wrap that comes with new TVs.

Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken. We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.Click here to download and start repairing.

Expert tip:

SPONSORED

This can be the reason the Vizio TV is not responding to any remote. So, move anything that might be in front of the sensor, including books, picture frames etc.

Also, use a cotton swab with a bit of distilled alcohol to clean any impurities on the Tv sensor and also on the IR remote sensor ( the small lightbulb on the remote’s front edge).

5. Reset Remote to Clear the Memory (for Universal Remotes)

  • Press and hold the Set or Setup button. Release the button when the LED light on the top of the remote blinks twice.
  • Type in the reset code of your remote, most Vizio universal remotes have a reset code of 981 or 977. You can also consult your remote’s manual to find the reset code.
  • Again, the LED should flash twice. This means that the memory has been cleared and any firmware issues should be resolved.
  • Switch it back to the TV using the button at the bottom of the remote and see if it works.

6. Change power source

Another effective solution that has been reported to work for some users is changing the power source your TV is connected to. This is imperative if the power transferred to your TV from the source is abnormal.

  • CBS All Access Streaming Problems: 3 Fixes That Will Help
  • YouTube Could Not be Run, Could Not be Installed [Roku]: Fix
  • Disney Plus Black/Blue/Green Screen Errors: 5 Easy Fixes
  • FIX: Disney Plus won’t let you update the payment method

This can stop your Vizio TV from responding to remote or buttons, as it will misbehave due to the dirty power. The solution to this is to change to a stable power source that can provide the quality your TV needs.

We have come to the end of this guide on the Vizio TV remote sensor is not working issue. If the problem persists, the problem might be related to the IR sensor. The only solution here is to replace it altogether or to change the sensor.

In the same vein, if the Vizio smartcast is not working, check our detailed guide to fix it quickly.

If our solutions worked for you or if you have any other ideas, leave us a note in the comments below.

If the advices above haven’t solved your issue, your PC may experience deeper Windows problems. We recommend downloading this PC Repair tool (rated Great on TrustPilot.com) to easily address them. After installation, simply click the Start Scan button and then press on Repair All.

Still having issues? Fix them with this tool:

  • remote control

Email *

Commenting as . Not you?

Comment