Canon Wireless printers are a great way to print a document – till the time they work. But when Canon MG3650 and Pixma MG3650s stop connecting to the wireless router, things get problematic. So, if you too are facing a similar problem or the printer is connected to the Wi-Fi, but the computer cannot find it, you are at the right place.
In this post today we will discuss reasons for the problem and how to fix Canon MG3650 Wi-Fi not working.
Before we start an important note for the readers:
Let’s get started.
To avoid such problems using an optimized and clean PC is recommended. To perform this, different utilities are available in the market. However, for us, Advanced PC Cleanup is the best tuneup utility as it offers all optimization tools in one place. To learn more about it, read the comprehensive review.
Download Advanced PC Cleanup
In addition to this, if you are interested in knowing more about the best PC Optimization and Cleanup Utilities read our earlier post.
Reasons For Printer Connected To Wi-Fi But Computer Can’t Find It
The printer driver is configured with an incorrect port
A faulty access point was selected during the setup
3rd party security tool or firewall is interfering with the printer software
In the case of a wired connection, USB might be an issue.
7 Ways To Fix Canon MG3650 won’t Connect To Wi-Fi In Windows 10
Method 1 – Restart Network Connection
Before diving into technical details, let’s strike off the prospective culprits –
- Ensure the printer is connected to the same wireless network as your system.
- If using a wired connection, ensure the cable is fine, and then restart your printer followed by network connection.
Note: The easiest way to do this is to plug out and plug in the router/modem cable. In addition to this, you can even use the reset button to reset the home network.
If you do not have network details or are not sure about network settings avoid resetting them.
Method 2 – Use Printer Troubleshooter
Windows 10 is an intelligent operating system and to help users it offers in-built troubleshooters, using which you can detect and fix several issues. Hence, to fix Canon printer issues, we will use Printer Troubleshooter. To use it, follow the steps below:
In the Windows search bar, type Troubleshooter. Select Troubleshoot settings.
Next select Troubleshoot from the left pane > select Additional troubleshooters
Here look for the Printer option, select it and click Run the troubleshooter
Wait for the process to finish. If the troubleshooter finds any problem with the printer driver, it will give you an option to apply this fix, click it and follow on-screen instructions to repair the process.
Reboot the system. The issue with Canon MG3650 Wi-Fi not working should now be fixed. If not, let’s move to the next step.
Method 3 – Disable 3rd party security tool
Often strict security measures taken by antivirus tools to protect system and data from malware and other malicious attacks interfere with the working of Wi-Fi printers. Hence, to ensure that is not the case here we suggest disabling the firewall and uninstalling the security suite. This will help fix the printer won’t connect to Wi-Fi, Canon Pixma MG3650 problem.
To uninstall security application, you can either using the best Uninstall manager for Windows or can follow the manual steps:
- Press Windows + R
- Type appwiz.cpl
- This will open the Programs & features window. Here look for the third-party security tool installed and running on your Windows.
- Select it > Uninstall, wait for the process to finish.
- Restart PC and then try to connect Cannot MG3650.
Method 4 – Update Canon and Wi-Fi Driver
Outdated and corrupt drivers are the biggest reason for many Windows problems. To ensure they are not creating a problem, here update both Canon printer and Wi-Fi Driver. You can do so, manually by visiting the manufacturer’s site. However, if you don’t like going through all that hassle, use Smart Driver Care – the ultimate driver updater for Windows.
Download and install Smart Driver Care
Run the best driver updater.
Click Scan Now and wait for the scan to finish.
Once done, update both Wi-Fi and Canon drivers by hitting the Update Driver option.
Note: If you want to update all outdated drivers at once, you need to upgrade to the Pro version.
- Restart the system and then try to connect the printer to the network. You should not face any problems.
Method 5 – Uninstall Canon driver via DELDRV64.EXE
If none of the steps have worked so far, try using the troubleshooting method used by Canon technicians.
Note: To follow the steps explained below, you’ll need to uninstall the printer driver, insert the WEP key on the printer, and then reinstall the Canon driver from the official page.
- Press Windows + R
- Type DELDRV64.EXE > Ok
- This will open Canon’s Uninstaller, follow on-screen instructions and remove the driver. Reboot the system to complete the process.
- On the printer, enter the WEP key (password) of the Wi-Fi and ensure it is connected to the home network.
- Visit the official page to download the latest driver.
- Launch the installer and follow on-screen instructions to complete the process, restart the system and check if the problem is fixed or not.
This should help fix my Canon MG3650 won’t connect to the Wi-Fi problem.
In case this doesn’t work, try checking wireless connectivity.
Method 6 -Check Wireless Network Connectivity
Issues with wireless connectivity also stop your Canon printer from getting connected to Wi-Fi. To confirm the problem is not caused due to connectivity, try the following tips:
- Check if Wi-Fi is working on all connected devices.
- No restrictions should be imposed on connectivity.
- Internet speed should be lag-free.
- Wi-Fi networks on Canon printers must be enabled and should not be restricted.
- Correct Canon printers should be added and set as default.
- System should not be in the “Airplane mode” and the router must be near the device.
- “Connect via wireless” should be selected when using a wireless connection.
Method 7 – Restart Wi-Fi Network
Sometimes the simplest action works to fix a serious technical problem. If everything so far has been a disappointment, try restarting the Wi-Fi.
- Plug off the power supply from your router and modem.
- Wait for at least 30 seconds.
- Power back the router and modem, wait for lights to get stable
Our Final Thoughts
Often when we face problems with the printer, router, the connectivity we miss out on the easiest fix i.e. restarting the device and Wi-Fi. With that said, whenever you face a network issue the first thing you must do is restart Wi-Fi and then try to connect. If this doesn’t help, you can move to technical fixes.
To help resolve the Canon MG3650 Wi-Fi connection issues, we did some in-depth research and tried to bring the workable fixes. We hope you enjoyed reading the post and will try the solution. Let us know which method worked for you in the comments section. Also, if you want us to address some other technical issue, feel free to let us know.
Why won’t my Canon printer connect to my Wi-Fi?
There can be multiple reasons due to which the Canon MG3650 printer is not connected to the Wi-Fi. The most common reasons of all are listed below:
- Canon Pixma MG3650 is not set as the default printer.
- The printer is neither powered on nor connected to the Wi-Fi.
- The firewall is blocking the connection request.
- Outdated driver
To resolve all such issues, you need to tune-up and optimize Windows. For this, you can use the Advanced PC Cleanup the best Windows optimizer. However, if you are looking for a standalone tool to update drivers try using Smart Driver Care – an effective single click driver updater.
Why is my wireless printer not connecting to Wi-Fi?
Since your wireless printer fails to connect to the Wi-Fi it seems –
- The printer is not connected to the network and vice versa computer is not connected to the network
- You are either using a VPN or security tool like Windows Firewall is blocking the connection
- Outdated Canon Printer driver
To fix these issues, you can try running Printer Troubleshooter, Check Wireless Connectivity, Restart Wi-Fi and update the outdated printer drivers.
How do I get my Canon printer to recognize my new router?
To connect Canon Printer to the new router, follow the steps below:
Turn on the printer
Select Setup from the home screen > Settings > Device settings > LAN settings > Wireless Direct > Wireless Direct active / inactive.
Choose ON. Confirm the action when asked by clicking Yes.
Setup necessary settings like:
The printer identifier (SSID).
Security setting.
Password.
- You will now see the name of the Wi-Fi-compatible device connecting your printer.
